Waste Management

Home / Greening Canadian Mosques / GCM Toolkit / Waste Management

We throw out all kinds of stuff:

Water bottles, food, takeout food containers, plastics, electronics, lightbulbs, batteries, construction materials, textiles, paper and much more. They all get tossed into the garbage. Most of the garbage collected in Canada ends up in landfills while a small amount is incinerated.This leads to an increase in Greenhouse Gas (GHG) emissions, soil, and water pollution. The extraction and processing of new resources needed to replace those discarded as waste leads to more pollution. From 2002 to 2018, the amount of waste sent to landfills has increased by about 7%, from 24.08 million tonnes in 2002 to 25.73 million tonnes in 2018. 

Figure A: Amount of waste sent to landfills by province in 2018.

Nova Scotia has the lowest rate of waste generation per capita at 386kg, while Alberta has the highest rate of waste generation per capita at 1,007kg. On average, Canada generates 720 kg of waste per capita.  

Figure B: Waste generation per capita by province in 2012.

The waste hierarchy is a classification of waste management options in order of their environmental impact and includes the 4 Rs’: reduce, reuse, recycling, and recovery. It was designed to show actions, from most preferable to least preferable, that would help protect the environment and reduce resource use and energy consumption. Consequently, reduction of resources is the most preferable option in this hierarchy while sending waste to landfills is the least preferred.

Figure C: The Waste Hierarchy.

It was not that many years ago that nearly 100% of all waste was dumped into landfill sites without any consideration given to the value of recycling waste back into production or the environmental and economic issues associated with our dependence on landfill sites. Today, that dependence has rapidly declined, and waste of all kinds is being sorted, reprocessed, and recycled back into production streams, resulting in a reduction of industrial emissions, production costs and the over harvesting of our natural resources. As a result, our environment is healthier and more sustainable and our economy, more efficient and productive.

Diverting waste from landfills by recycling and composting can help reduce the impact of solid waste on the environment. 

The diversion rate (DR) is calculated as shown below:

The diversion rate is calculated from the amount of recyclable and compostable material added up and then divided by the total amount of waste or garbage sent to landfill for disposal. Diversion rate informs us about the percentage of material that is being recycled, reused and/composted preventing it from going to the landfills. The higher our diversion rate, the better we are doing.

The waste diversion rate of Canada in 2016 was 27%, an increase from 22% waste diversion in 2002. Prince Edward Island has the highest diversion rate as a province at 50% whereas Newfoundland and Labrador has the lowest at 9%.

Figure D: Waste Diversion by Province in 2016

The Canadian Council of Ministers of the Environment (CCME) have set goals to reduce per capita waste disposal from 706 kg per person in 2014, to 490 kg per person (a 30% reduction) by 2030, and to 350 kg per person (a 50% reduction) by 2040.

Circular Economy

This traditional system of materials moves through a linear process of “take – make – dispose” where they are manufactured from raw materials, consumed, and then disposed of in the landfill. This model of consumption has become part of our culture and has resulted in a 19% increase in greenhouse gas emissions between 1990 and 2014 as the amount of waste disposed in landfills has increased.

A circular economy aims to maximize the value of raw materials and eliminate waste by improving the design of materials, products, and business models. The value of products and materials is maintained for as long as possible. Waste is minimized and resources are kept within the economy when a product has reached the end of its life, to be used again to create further value.

Linear and Circular Economy

Recycling and Contamination

One environmental program that just about every Canadian seems to buy into is recycling. Most Canadians believe that we can put some of our waste into a blue bin, and it will be transformed into something useful instead of being dumped in a landfill. However, many of us are recycling incorrectly resulting in contamination where the recycling becomes trash. 

Recycling contamination occurs when materials are sorted into the wrong recycling bin (placing a glass bottle into a mixed paper recycling bin for example), or when materials are not properly cleaned, such as when food residue remains on a plastic yogurt container. There are many types of recycling contamination, including plastic, food waste, and hazardous waste.  Some contaminants are worse than others and when improper, non-recyclable items contaminate the sorting bins, recycling workers can be exposed to hazardous waste, vector-borne diseases (living organisms that can transmit infectious diseases between humans or from animals to humans), and other physically damaging items. However, contamination is easily avoidable, by simply following the recycling guidelines for your community and in your building that show what can be recycled and what cannot.

Education and Engagement for Recycling and Waste Management

For any waste and recycling program to be successful at a mosque (or any facility), educational activities and engagement of visitors must be incorporated as part of the initiatives.  There are many resources available to access such as Waste Reduction Canada with support from Recycling Council of Ontario.

Waste Reduction Week in Canada is an established year-round program, focused on the principles of circular economy, resource efficiency, and waste reduction. The program’s primary purpose is to celebrate environmental efforts and achievements while encouraging new innovative ideas and solutions. The celebratory nature of the campaign is what motivates learning and behaviour change. The program’s educational resources and “take action” messaging empower all Canadians to adopt more environmentally conscious choices. Waste Reduction Week in Canada further provides information and ideas to reduce waste in all facets of daily living, creating the solutions to the many environmental challenges we face including climate change, water pollution and preservation of natural resources.

Food Waste Friday

Sample Messaging from the Campaign.

Signage is crucial in the participation of a recycling program. It is the best, and often the only way to communicate to a participant or visitor to the mosque. This is the most important step in the “chain of transfer” the materials need to make to get to the recycling facility. If that first step is done incorrectly that material can not only be lost forever, but potentially cross contaminate the materials it’s mixed with. Signage should provide proper direction, clarity, at eye level (where possible), consistency and be in good condition. Communication through signage is vital to any waste and recycling program to ensure that from the very beginning the materials have a chance at proper disposal. Signage must be a priority as it provides the opportunity to encourage behaviour change both at the mosque and at home.

Jaffari Community Centre’s Waste Management Initiatives

GCM Case Study: Waste management initiatives.

Determining What Waste Services Your Mosque Has

The easiest way to determine what waste services your mosque currently has is to look at the commercial waste utility bill that the waste hauler would provide to you every month. This bill would list what waste services (trash, recycling, organics) are being billed to the mosque and how frequently are these bins picked up by the hauler. In some cases, you may need to approach the commercial landlord to obtain this information if your mosque is in a plaza or in an area that has multiple businesses close together. The utility bill will inform you if your mosque currently has access to or can get access to recycling and organics services. This will be crucial for waste diversion efforts inside the mosque. 

Most haulers provide the businesses they service with a flyer/booklet that informs them of what materials are accepted in their recycling/organics bins. This can be useful for the mosque to develop signage for the bins within the mosque as it would help reduce contamination. If your hauler does not currently provide recycling/organics service to your mosque, you can inquire as to how much they cost. On average, recycling services cost less than trash services. The mosque should see a savings in moving materials from the trash bins to the recycling bins as a result. The number of trash hauls would be reduced, and the number of recycling hauls will increase. 

In addition to adding recycling/organics services, the Mosque can also do the following to reduce their waste services costs:

  1. Negotiate their trash services with the hauler to reduce costs. This could be through a reduction in the number of hauls per week or through a smaller bin if the mosque does not generate a lot of trash
  2. Research other haulers that can provide similar services and compare costs
  3. Share hauler costs with neighbouring businesses

Suggested Actions

  1. As a rule of thumb, lights should be turned off when leaving the main spaces of use for more than 15 minutes. For washrooms and storerooms, lights should always be turned off immediately when leaving the room. 
  2. Daylight should be let into the space by removing blinds, and any obstructions placed in front of windows and inlets should be removed. 
  3. To build awareness and sensitization of Mosque staff and of visitors towards the issue of excessive use of lighting, signs and posters can be placed, as well as reminding Mosque users at the beginning of prayers and events taking place at the Mosque.
This dynamic panel will showcase young leaders who are inspired by their faith to drive positive change in their communities. These passionate individuals are committed to sustainability and environmental justice, using their values to inspire action and pursue careers that make a lasting impact on the planet.
Rajbalinder Ghatoura (Moderator): Program Coordinator, Energy Management, City of Brampton & Founder of Kudrat Di Rakhia
Karishma Porwal: Climate Communications Manager, Environmental Defence & Eco-Expert, CTV Kiana Bonnick:  Corporate Knights Top 30 Under 30 Sustainability Professional Milandeep Bhutta: Planner, County of Simcoe
The event will also include a guided tour of the Unitarian Congregation of Mississauga and highlight their sustainability efforts, and feature City of Brampton, City of Mississauga, The Community Climate Council, Kudrat Di Rakhia, Faith & the Common Good and EnviroMuslims as exhibitors.
  1. Set up collection services for organics, recycling (if not already in place).
  2. Research cost for services in your area for recycling and organic collection.
  3. Purchase recycling equipment e.g. bins.
    Depending on how large the mosque is may be necessary to purchase additional bins for waste and recycling and ensure they are placed side by side and in high traffic areas of the mosque for users to easily access.
  4. Set up a Community Fridge to encourage less food waste.

A community fridge is a straightforward concept. Restaurants and households donate untouched food that would typically go to waste, and anybody in need of a meal can take what they want. “Whoever is in need, like low income families who are struggling, can just go and open the fridge 24/7 and enjoy nutritious, good quality food,” says Laylo Atakhodjaeva, co-founder of the non-profit organization Road to Zero Waste, a grassroots organization focused on eradicating food insecurity in the Greater Toronto Area that runs the community fridge. Every night nearby restaurants pack up the extra food left over from the day and puts it in the community fridge. Instead of throwing the food in the garbage, someone could use it and is a perfect opportunity for those who are able to give back to the community.

  1. Complete Waste Assessment or 3rd party waste audit including building inspection and Waste Reduction Work Plan. Waste audits aid in identifying the quantity and type of waste produced by an organization at any site and waste diversion strategies are adopted to maximize reduction of waste.
Figure: Snapshot of waste at a facility
  1. Install waste management equipment e.g. garburators. Garburators: is a modern kitchen appliance that offers a convenient way to manage food waste in a kitchen. It is installed neatly under the kitchen sink and attached to the drain. These are controversial as they can put a strain on waste and wastewater systems in buildings.

Branding Opportunities

There are multiple ways that a mosque can get its sustainability initiatives onto merchandise that it can distribute amongst its attendees to raise awareness. Having the mosque’s name along with a short sustainable message or tagline can go a long way. For example, on a reusable water bottle, the mosque can have its name/logo and a short message of “Using me saves 156 plastic bottles annually”. This can help raise awareness on how important it is to use a reusable water bottle compared to a plastic water bottle. 

There are multiple online and/or in person printing platforms that mosques can consider. One of the most affordable ones is Vistaprint. This online site allows you to design your logo/message and lets you place it on the merchandise of your choice. They often have sales and deals for large orders which may end up being economically feasible for the mosque. Alternatively, this can also be carried out in stores such as Marks however these options will be pricier than the online printing platforms.

It is recommended that if a mosque is looking to secure a large number of branded items, that it reach out to another mosque close by. Suppliers will likely reduce their pricing when they are approached with a larger bulk order.

Funding opportunities for Waste Management

There are limited funding opportunities that exist for waste management and waste management initiatives. Unfortunately funding opportunities from Municipalities such as City of Toronto’s Waste Reduction Community Grants and York Region’s Circular Economy Initiative Fund are restricted to residential waste and mosques are not eligible at this time. The most likely avenue for sourcing funding for waste management occurs through establishing a collaborative partnership with a donor (such as a Foundation, Municipal partner or a private corporation) with your organization as the recipient for a specific project. Past projects for waste were funded through a grant or capital contribution in combination with a wastewater or energy project.

Additional Resources

  1. Strategy for a waste-free Ontario: Building the Circular Economy 
  2. Food and organic waste policy statement 
  3. Blue Box Recycling-proposed amendments
  4. Zero Plastics Waste 
  5. Hazardous and Special Products proposed regulation
  6. Sample Action Plan-updating signage, Toronto Environmental Alliance

Waste Reduction Canada

Toronto Environmental Alliance

Conduct Your Own Waste Audit